Toshiba e-STUDIO 206L - Accessing Scanned Data on Windows

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 29
1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Finisher MJ-1101 and the Hole Punch Unit MJ-6103 (both
optional)
Paper misfeed in the upper receiving tray
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Remove the misfed paper.
3
Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit MJ-6103 is installed, proceed to step 5.
4
Remove the misfed paper.
Proceed to step 8.
2
1