Toshiba e-STUDIO 206L - Paper Misfeed in the Saddle Stitch Unit of the Saddle Stitch Finisher MJ-1033 (Optional)

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 45
1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Saddle Stitch unit of the Saddle Stitch Finisher MJ-1033
(optional)
8
Close the front cover of the finisher.
1
Remove the paper misfed on the saddle stitch tray in
the lower left part of the finisher.
2
Open the front cover of the finisher.
3
Move the lower green lever to the right and remove
the misfed paper.
4
Return the lever to its original position.
2
1