1 PREPARATION
42 Preparation 3 - Registering Size of Paper Placed
2
Press the [DRAWER] button several times until the lamp of the
drawer in which you placed paper is lit.
3
Press the [COPY] button several times until the [OTHER] lamp is lit.
“Fxx” appears in the LED display. (Two digits come at “xx”.)
4
Key in the code number of the paper placed in the drawer.
e.g.) Placing LT size (= code number “10”)
If the [FUNCTION CLEAR] button is pressed at this step, the size is not registered and
the equipment will return to its normal status.
5
Press the [START] button.
The paper size has been registered as “OTHER” size.
To Next Page
Loading...
