Zooming In/Out Copy Image 61
1
Place paper in the drawer.
2
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting A4 size
You can select the desired paper size with the [DRAWER] button in the same procedure.
3
Press the APS/AMS selecting button until the AMS lamp is lit.
4
Place the original on the Automatic Document Feeder (optional).
5
Select the other copy modes as required, and then press the
[START] button.
Copying is performed with the most suitable reproduction ratio for the specified paper
size.
If the [FUNCTION CLEAR] lamp is blinking and copying stops
The direction of the original placed is not correct. Press the [FUNCTION CLEAR] button to exit
the original. Then rotate the original by 90 degrees to place it in the correct direction.
To Next Page
Loading...
