e-STUDIO2500c/3500c/3510c
PCL5c PS3
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the "Pure Gray" option on the printer driver.
("Pure Gray" allows gray areas to always be reproduced using all color toners (C, M, Y and K) without
changing the hue of color areas.)
* This adjustment will be effective, only if a file created on a general application, such as Microsoft Office,
is printed. It may not be effective, if a file created on a graphic application (e.g. Illustrator) or a DTP
application (e.g. QuarkXPress) is printed, or a PDF file created on these applications is printed.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Unmark the "Pure Gray" checkbox in the "Basic" tab.
3. Printer-specific Adjustments
3.5
To Next Page
Loading...
