e-STUDIO2500c/3500c/3510c
PCL6 PS3
Procedures
* Both the service technician and the user can use procedure (1).
* Only if the saturation of R (Red) is still insufficient even after procedure (1) has been used, must the service
technician use procedure (2).
(1) Change the "Saturation" option on the printer driver.
• Select the desired value for saturation on a scale of -4 (Palest) to 4 (Brightest).
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Change the "Saturation" option in the "Image Attribute" tab.
3. Printer-specific Adjustments
3.6
3. Printer-specific Adjustments
3.8
To Next Page
Loading...
