e-STUDIO2500c/3500c/3510c
PCL6 PS3
Procedures
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedure (1).
* Only the service technician must use procedures (2) and (3).
* The item to set varies depending on the type of data to adjust. Select an effective option according to the data
format to adjust, such as a print image (raster data), text (font), and line drawing (graphic data).
* This adjustment will have an effect only on Auto or Color mode printing.
(1) Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Mark the "Detail" checkbox in the "Color Balance" tab. Press the [Edit] button.
Set the value for the Low/Medium density of the color you would like to adjust, within a range of "1" to "4"
in the "Color Balance Details" option.
* This adjustment will have an effect only on printing on a Windows PCL6 or PS3 emulation printer driver.
(This adjustment cannot be performed on a Macintosh printer driver.)
* Initially, set "4" and check the printout.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, the service technician must use the next procedure
according to the image type.
• To adjust the color image: Go to procedure (2).
• To adjust the black and white image: Go to procedure (3).
3. Printer-specific Adjustments
3.15
To Next Page
Loading...
