e-STUDIO2500c/3500c/3510c
(3) Enter adjustment mode [05]. Change the values for codes [604/605], [1737 to 1741] and [1757] to adjust
the sharpness intensity.
* Increasing the sharpness intensity will enhance the edges of the image.
Color mode Original mode [05] code Recommended value
Acceptable
value range
Default
Text/Photo 05-604
Black
Text 05-605
Set a value larger than 128. 0 to 255 128
Text/Photo 05-1737
Text 05-1738
Printed image 05-1739
Photo 05-1740
Full color
Map 05-1741
Set a value larger than 128. 0 to 255 128
Auto color Text/Photo 05-1757 Set a value larger than 128. 0 to 255 128
* Setting "0" provides the softest image, while setting "255" provides the sharpest image.
Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in
the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the
sharpness intensity by 25. If the sharpness intensity of the center value is changed, each step of the indicator
will be changed accordingly. (For instance, if the center value is increased by 25 (sharper), the value of each
step of the indicator will also be increased by 25 (sharper).)
* The value adjusted for the sharpness intensity is shared in the Full color mode with the Printed image
mode selected and in the Black mode with the Photo mode selected. Therefore, adjusting the copy image
quality in either of the modes affects that in the other mode. Perform copy image quality adjustment in the
mode that is used for the adjustment, while checking that in the other mode.
<Note> "Sharpening the copy image" and "Minimizing moiré" are mutually contradictory. When an
adjustment is performed to sharpen the copy image, moiré may occur.
Precautions after the completion of the adjustment
Nothing in particular.
Remarks
• Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a
loss in copier performance, including degradation in the image quality.
• Procedures (2) and (3) provide the same adjustment effect. However, procedure (3) allows more flexible
adjustment.
2. Copier-specific Adjustments
2.9
To Next Page
Loading...
