Toshiba e-studio 2540c - 1.5 To Correct Out-of-Registration Colors; 1.6 To customize the image density; 2.2 To Closely Match the Color Balance of the Original; 2.3 To Improve the Reproducibility of Gray

e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
iii
Table of Contents
3.18 To Adjust the Image Density in the Toner Save Mode................................3-71
3.19 To Print Illegible Gray or Colored Text in Black ..........................................3-74
3.20 To Ignore Blank Pages for Printing.............................................................3-76
3.21 To Sharply Print Black Text ........................................................................3-79
3.22 To Prevent Dark Toner from Coming Off ....................................................3-89
3.23 To Register the Image Quality Adjusted Corresponding to a Preference (To use the
Custom Color Settings)......................................................................3-91
3.24 To Print a Full-Color Original in Two Colors................................................3-94
3.24.1 To Adjust Colors .......................................................................................3-95
3.24.2 To Adjust the Sharpness ........................................................................3-100
3.24.3 To Print a Full-Color Original in Two Colors ...........................................3-102
3.25 To Use ICC Profile....................................................................................3-103
3.25.1 To Create ICC Profiles for Printing on the Paper to be Used .................3-104
3.25.2 To Print Precise Colors Using Existing RGB Source ICC Profiles..........3-108
3.25.3 To Perform Simulated Printing with CMYK Inks
of Each Ink Manufacturer..................................................................3-112
3.25.4 To Convert Colors with Specified Source ICC Profiles (Not Using Embedded ICC
Profiles)
..............................................................................................3-116
3.25.5 To Perform Further Adjustment After Using ICC Profiles .......................3-121
3.26 To Switch Overprint (Overlaid) Images.....................................................3-124
4. e-Filing-specific Adjustments
4.1 To Clearly Store a B/W Image in the Auto Color Mode.................................4-1
4.2 To Store an Original while Reducing the File Size........................................4-3
4.3 To Store a Color Photo Image, while Minimizing Moiré ................................4-5
4.4 To Match the Color Balance on the Original (To adjust the color balance in
Print to Box).........................................................................................4-8
4.5 To Scan and Print, while Minimizing Moiré .................................................4-10
4.6 To Finely Print the Image Stored in the e-Filing box (To print images stored
through Copy to Box or Print to Box) .................................................4-12
4.7 To Store an Image Suitable for Displaying on the Monitor
or Image Editing.................................................................................4-14
4.8 To Finely Print Color Images Scanned and Stored (To print images stored
through Scan to Box) .........................................................................4-16
4.9 Appendix....................................................................................................4-18
5. Scanning-specific Adjustments
5.1 To Clearly Scan Text (To reduce noise around text) ....................................5-1
5.2 To Scan an Original, while Eliminating the Background Color (To eliminate the
background density).............................................................................5-3