Toshiba e-studio 2540c - To Adjust the Print Image Quality in the Black and White Mode

e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 55
3. Printer-specific Adjustments
3.14.2 To Adjust the Print Image Quality in the Black and White Mode
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedure (1).
* Only the service technician must use procedures (2) and (3).
(1) Change the "Halftone" option on the printer driver.
For Windows
* This adjustment will have an effect only on Black and white mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Select "Detail" from among the "Halftone" options in the “Basic” tab.
PCL6 PS3 XPS