e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 79
2. Copier-specific Adjustments
To copy while eliminating the background color (to adjust the reference value for the
background density adjustment)
* This adjustment is effective when you do not copy the dark color of the background of an original.
(a) Enter the adjustment mode [05]. Change the values for codes [7777] and [7778] to make the range
correction operation fixed.
• The code to be set differs depending on the density mode. Select the [05] code for the target
original mode and change the value to “0”.
Original
mode
Density
mode
[05] code
Recommended
value
Acceptable
range value
Default
Automatic 05-7777
Text/Photo
Manual 05-7778
0 0, 1 1
* Explanation for setting values
Setting value Range correction operation
0 Fixed
1 Varied
To increase the sharpness intensity
* This adjustment is effective when you want to copy light text, thin lines or illustrations more clearly.
(a) Enter the adjustment mode [05]. Change the value for the code [7795] to adjust the default value for
the sharpness intensity.
Color mode
Original
mode
[05] code
Recommended
value
Acceptable
range value
Default
Full color User custom 05-7795
Set a value larger
than 128.
(129 to 228)
0 to 255 128
<Note> If the setting value is too large, Moiré may appear.
To Next Page
Loading...
