e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 43
3. Printer-specific Adjustments
(1) Change the "Use Sharpness Filter" option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Uncheck the "Use Sharpness Filter" checkbox in the "Image Attribute" tab.
* Always set "Uncheck". Setting "-1" or a smaller value may provide blurred print images.
PCL6 PS3 XPS
To Next Page
Loading...
