e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 9
6. Printer-specific Adjustments (GA-1211)
(5) Change the name of the profile and then click [OK].
* The default name is “(name of the selected profile)” + “Copy 1”.
• The profile is copied under the set name. The copied profile appears on the Output Profile field of the Profile
Manager.
(6) Select the copied profile and then click [Settings] on the top of the screen.
• The Output Profile Settings screen appears.
* If you created the profile with EFI Color Profiler, install the profile in the GA-1211 using Profile Manager.
To Next Page
Loading...
