7 Internet Fax
100 How to Perform Internet Fax
4
Specify the following items as you require and press the [ENTER]
button.
y [SUBJECT]
Press this to enter the subject of the Internet Fax to be sent.
y [BODY]
Press this to enter the body message of the Internet Fax to be sent.
yWhen you press the [SUBJECT] or [BODY] button, the letter entry screen is displayed.
Enter the value using the keyboard and digital keys, and press the [ENTER] button to
set the entry.
yThe administrator can change the body message from TopAccess. See the "TopAccess
Administrator Mode" in the TopAccess Guide for details.
Other items such as “ECM”, “QUALITY TX”, “LINE SELECT”, “[SUB/SEP]”, “[SID/PWD]”
are only applied to the fax transmission. When you only perform the Internet Fax trans-
mission, you do not need to specify these items.
5
Specify the E-mail addresses that you want to send.
y You can specify the E-mail address by various ways. See the following procedures
for each instruction.
P.101 “Specifying Destinations”
You can also set the advanced functions such as the 2-sided original transmission and priority
transmission.
P.112 “Advanced Function”
6
Press the [START] button.
To Next Page
Loading...
