8 Remote Scan
126 Scanning Remotely Using Remote Scan Driver
2
Enter each item to specify the network address of the device and
click [OK].
IPV4 — Select this to search for devices set with an IPv4 address.
IPV6 — Select this to search for devices set with an IPv6 address.
IPX Address — This is disabled because the Remote Scan driver does not support the
IPX/SPX connection.
Name — Enter the printer name.
Location — Enter the location of the printer.
You must enter “Name” and “IP Address”.
3
The entered printer is added in the list. Select the printers that you
want to monitor from the list and click [OK].
y You are connected to the selected device.
— Configuring Discovery Settings
You can configure the discovery settings.
To Next Page
Loading...
