5 Using Template
70 Scanning Using Template
Scanning Using Template
Users can also use a template to operate scanning on this equipment.
It enables users to register templates for scanning operations.
After registering a template, users can operate the desired scanning operation quickly without
setting the scanning conditions.
Before scanning using a template, users must register a template for scan operations.
For instructions on how to register a template, see the following section.
P.78 “Registering Scan Template”
The templates that the Scan to E-mail agent is set will be available after user authenticates the
access rights for the Scan to E-mail operation. For instructions on how to operate scan using a
template, see the following section.
P.73 “Using Scan to E-mail template when User Authentication for Scan to E-mail is enabled”
Scan Procedure using a template
1
Place the original(s).
y For instruction about placing the originals, see Operator’s Manual for Basic Func-
tion.
2
Press the [TEMPLATE] button on the control panel to enter the tem-
plate menu.
y The screen to select a template group is displayed.
To Next Page
Loading...
