Toshiba E-STUDIO 282 User Manual

234
8.JOB STATUS
2.Confirming Print Job Status (Cont.)
8
Continuing printing after proof printing
1
Select the job you want to print on the proof print job list.
• If the corresponding job is not displayed on the page, press the [Prev] or [Next] button to switch the page.
2
Press the [RELEASE] button.
• Printing starts.
• The printing status can be confirmed on the print job list.
When you want to change the number of sets
When you want to change the number of sets, press the [EDIT] button and key in the desired
number. Then press the [RELEASE] button to start printing.

Toshiba E-STUDIO 282 Specifications

General

Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Memory	128 MB
Print Speed	28 ppm
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Interface	Ethernet, USB
Copy Speed	28 ppm (A4)