Toshiba E-STUDIO 282 User Manual

68
2.HOW TO MAKE COPIES
2.Making Copies (Cont.)
2
Scanning the next originals during copying (Auto job start)
You can reserve a copy job by scanning the original during continuous copying or while “READY (WARM-
ING UP)” appears.
1
Place the original(s).
2
Select the copy mode and set the number of copies.
Note that the job starts in the copy modes of the previous job unless you set new ones particularly for this job.
3
Press the [START] button on the control
panel.
• Up to 5 jobs can be stored in the memory. When a 6th job is
placed on the original glass or the Reversing Automatic Docu-
ment Feeder (optional) and the [START] button is pressed, “Auto
Start” appears on the touch panel.
• A maximum of 1000 A4 sheets, or up until the memory becomes
full can be accepted per 1 copy job. ( P.57 “Maximum number
of sheets for scanning”)

Toshiba E-STUDIO 282 Specifications

General

Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Memory	128 MB
Print Speed	28 ppm
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Interface	Ethernet, USB
Copy Speed	28 ppm (A4)