Toshiba e-STUDIO 2820c - Paper Jam in the Saddle Stitch Unit (Optional)

1 TROUBLESHOOTING FOR THE HARDWARE
28 Clearing a Paper Jam
 Paper jam in the Saddle Stitch unit (optional)
Saddle Stitch unit is in the inside of the Saddle Stitch Finisher MJ-1030.
1
Open the front cover of the Finisher.
2
Slide the green handle toward the right, and remove
the jammed paper.
3
Move the green handle to the right-hand side.
4
Remove the jammed paper and return the lever to its
original position.
5
Turn the right knob counterclockwise.