How to fix Toshiba e-Studio 350 driver installation error 'Wrong Port Type'?
To resolve the 'Wrong Port Type' error during printer driver installation for your Toshiba All in One Printer: 1. Click 'Cancel' until the Add Printer Wizard terminates. 2. Double-click 'Add Printer' from the Printers folder, and when prompted to select a port, choose 'Local Port'.
What to do if my Toshiba e-Studio 350 shows error code A222?
If you encounter the error code A222 on your Toshiba All in One Printer, ensure the power cable is properly and securely connected. Also, check if the power voltage is stable.
What does it mean when my Toshiba e-Studio 350 All in One Printer says 'Finisher Disconnected'?
If your Toshiba All in One Printer indicates 'Finisher Disconnected', ensure the finisher is securely connected to the copier.
What to do if my Toshiba e-Studio 350 says 'Cover Open'?
If the Toshiba All in One Printer displays the message 'Cover Open', make sure to close the indicated cover.
What to do if my Toshiba e-Studio 350 says 'Toner Empty'?
If the Toshiba All in One Printer displays the message 'Toner Empty', replace the toner cartridge.
What to do if my Toshiba e-Studio 350 says 'Paper Empty'?
If the Toshiba All in One Printer displays the message 'Paper Empty', add paper to the drawer indicated by the printer.
Why does the display not change when buttons are pressed on my Toshiba Copier?
If the display on your Toshiba Copier doesn't change when you press buttons or icons, here are a few possible reasons: * The copier might be in energy-saving mode. Press the ENERGY SAVER or START button to exit this mode. Please note that it may take a moment for the copier to become ready. * The power might be off due to the weekly timer. Press the START button to turn the power back on. * You may need to enter the department code. Input the correct code. * The copier could be warming up. Wait for it to become ready.
What to do if network or touch panel display disabled after LDAP search on Toshiba Printer?
If the network or touch panel display is disabled after an LDAP search on your Toshiba Printer, ensure you have entered the correct LDAP settings. Pay close attention to re-entering the password correctly, as it is displayed with asterisks.
General| Brand | Toshiba |
|---|---|
| Model | e-Studio 350 |
| Category | All in One Printer |
| Language | English |
To Next Page