Toshiba e-Studio 350 - Setup Flow for Novell Printing

44
5.SETUP FLOW
4.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for Novell Printing
When you want to manage the print jobs in the NetWare print server instead of directly printing to this
equipment, an administrator must configure the NetWare print servers and this equipment.
This equipment supports the PSERVER in the NetWare 4.x bindery emulation mode, NetWare 4.x NDS
mode, NetWare 5.x NDS/NDPS mode, and NetWare 6.x NDS/NDPS mode.
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Setting up the Print
Server
Configure the printer on the Windows print server as shared printer.
Reference: Network Administrator’s Guide
- Chapter 5 "SETTING UP NETWORK SERVER"
"Setting up Windows Print Server"
Install the Printer
Driver on the Client
computers
Install the printer driver from the queue in the Windows print server by point and
print installation. This installation method is common for Windows print sharing
service. Please refer to the Windows documentation about the installation from
the Windows shared printer.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Setup Flow Description/Reference
Ð


NetWare 4.x
NetWare 5.x
NetWare 6.x
Connecting with a NetWare Environment over TCP/IP or IPX/SPX Network
Setting up the Novell
printer connection
Setting up the SMB
printer connection
to Novell print queue
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
