Toshiba e-Studio 350 - Setup Flow for Lpr Printing

37
5
Setup Flow for LPR Printing
This equipment can be used with LPR printer connection for Windows NT 4.0, Windows 2000, Windows
XP, and Windows Server 2003. LPR printing is the common method to setting up the printer from servers.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine and your computer with a printer cable or USB cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"1.CONNECTING TO THE PARALLEL PORT"
- Chapter 4 "CONNECTING TO THE DEVICE"
"2.CONNECTING TO THE USB PORT"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for Parallel Printing"
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for USB Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""


Ð

Ð

Ð

Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connecting over TCP/IP Network
Setting up the LPR
printer connection
