47
5
Setup Flow for LPR Printing
This equipment can be used with LPR printer connection using the LaserWriter 8 printer driver.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the Printing
Service
Enable the LPD Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Install the Client
Software
Install the Macintosh PPD file from the Client1 CD-ROM and creating a printer.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing the Client Software for Macintosh"
Mac OS 8.6
Mac OS 9.x
Mac OS X
Connecting over TCP/IP Network
Setting up the LPR
printer connection
Ð
Ð
To Next Page
Loading...
