SETTING GENERAL FUNCTIONS 117
Setting the Weekly Timer
Using the built-in weekly timer, you can have this equipment automatically turned ON and OFF
at specified times. For instance, you can set the timer for the starting time and closing time of
your office so that the copier will automatically turn itself ON and OFF at those specified times.
You can turn on the power simply pressing the [START] button on the control panel when the
device is OFF-mode by the weekly timer. If you leave the device for a while after the latest oper-
ation, it will automatically return to OFF-mode again by the weekly timer.
When the power switch is turned off, the weekly timer does not work.
1
Press the [GENERAL] button in the ADMIN menu.
y The GENERAL menu is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU". P.107
2
Press the [ENERGY SAVER] button.
y The ENERGY SAVER menu is displayed.
To Next Page
Loading...
