SETTING PRINTER/E-FILING FUNCTIONS 193
SETTING PRINTER/E-FILING FUNCTIONS
You can configure the printer and e-Filing functions that will apply to the print jobs or e-Filing
jobs.
1
Press the [PRINTER/E-FILING] button in the ADMIN menu.
y The PRINTER/E-FILING screen is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU". P.107
2
Specify the following items as you require.
y AUTOMATIC CHANGE OF PAPER SOURCE — When the [ON] button is selected,
this equipment will feed the same size of paper from the different drawer if the speci-
fied drawer becomes empty.
y PAPER OF DIFFERENT DIRECTION — When the [ON] button is selected, this
equipment will feed the same size of paper that is set in a different direction if the
specified drawer becomes empty.
y SUSPEND PRINTING IF STAPLER EMPTY — Select the [ON] button to enable sus-
pending printing if stapler empty occurs. When this is enabled, this equipment quit
printing that stapling is specified if stapler empty occurs. When this is disabled, this
equipment will print a document without stapling even if stapler empty occurs.
3
Press the [ENTER] button.
To Next Page
Loading...
