SETTING FILE FUNCTIONS 179
SETTING FILE FUNCTIONS
This function allows you to automatically delete the files stored by the Scan to File operations.
This function is used to periodically delete stored files in the local storage to maintain the avail-
able hard disk space.
1
Press the [FILE] button in the ADMIN menu.
y The FILE menu is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU". P.107
2
Press the [ON] button to enable the storage maintenance, or [OFF]
button to disable the storage maintenance.
y When you press the [ON] button, the “Storage Maintenance” field will be highlighted.
Continue to next step to enter the number of days.
y When you press the [OFF] button, skip to step 4.
3
Enter the number of days the system preserve the files before
deleting them automatically using the digital keys.
y You can enter 1 to 99 days. To correct the value, press the [CLEAR] button to delete
the input value and enter the number of days.
4
Press the [ENTER] button.
To Next Page
Loading...
