MANAGING DEPARMENT CODE 57
Resetting All Department Counters
This function clears all department counters to “0”.
y This function is available only when the department code is enabled.
y This function clears only the department counters. You cannot clear the total counter.
1
In the DEPT. MANAGEMENT menu, press the [RESET ALL
COUNTERS] button.
y The clear confirmation screen is displayed.
For the procedure to display the screen above, see "Logging On As Administrator".
P. 53
2
Press the [YES] button to clear all department counters, or [NO]
button to cancel clearing.
To Next Page
Loading...
