4 SETTING ITEMS (ADMIN)
130 SETTING GENERAL FUNCTIONS
3
Press the [CALIBRATION] button.
y The CALIBRATION menu is displayed.
4
Press the [PRINT] button.
5
Press the [DEFAULT] button to set the default calibration setting for
selected job type, or [CALIBRATION] button to adjust the calibra-
tion setting for selected job type.
y When you press the [DEFAULT] button, the system maintains the default calibration
setting for selected job type and returns to the CALIBRATION menu.
y When you press the [CALIBRATION] button, the chart is printed out and calibration
guide illustration is displayed on the touch panel.
To Next Page
Loading...
