MANAGING ADDRESS BOOK 13
6
Specify following items as you required.
y TX TYPE — This sets the type of the fax transmission mode. Press the [MEMORY
TX] button to select the memory transmission mode or the [DIRECT TX] button to
select the direct transmission mode.
y ECM — Select whether enabling or disabling the ECM (Error Correction Mode) to
automatically resend any portion of the document affected by phone line noise or dis-
tortion. Press the [ON] button to enable the ECM, or the [OFF] button to disable the
ECM.
y QUALITY TX — Select whether a document is sent in the Quality TX mode. This fea-
ture allows to send a document at a slower speed than a normal so that the transmis-
sion will be less affected by line condition. Press the [ON] button to enable the
Quality TX, or [OFF] button to disable the Quality TX.
y LINE SELECT — Select the line to be used for the fax transmission. Press the
[LINE1] button to use the Line 1, or [LINE2] button to use Line 2. The [LINE2] button
can be selected only when the optional 2nd line board is installed.
y [SUB] — Enter the mailbox number if you want to send originals to the mailbox in the
remote fax.
y [SID] — Enter the password to input a document into the mailbox in the remote fac-
simile.
y [SEP] — Enter the mailbox number if you want to retrieve a document from the mail-
box in the remote fax.
y [PWD] — Enter the password to retrieve a document from the mailbox in the remote
facsimile.
When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is dis-
played. Enter the value using the keyboard and digital keys, and press the [ENTER] but-
ton to set the entry.
7
Press the [ENTER] button to save option settings.
To Next Page
Loading...
