4 SETTING ITEMS (ADMIN)
162 SETTING COPY FUNCTIONS
4
Specify following items as required.
y AUTOMATIC CHANGE OF PAPER SOURCE — When this is set to [ON], this equip-
ment will print on the different size of paper when the specified paper size is not set.
When this is set to [OFF], this equipment will display a message to set the correct
paper.
y PAPER OF DIFFERENT DIRECTION — When this is set to [ON], this equipment will
rotate the image and print on the different direction of paper if the correct direction of
paper is not set. When this is set to [OFF], this equipment will display a message to
set the correct paper.
y SUSPEND PRINTING IF STAPLER EMPTY — When this is set to [ON], this equip-
ment quit the job with stapling when the stapler empty occurs. When this is set to
[OFF], this equipment will continue the job without stapling.
y DEFAULT MODE OF AUTO COLOR — Press the default color mode for Auto Color.
5
Press the [ENTER] button.
y Returns you to the ADMIN menu.
To Next Page
Loading...
