284
9.BLINKING GRAPHIC SYMBOLS
3.Replace Toner Cartridge Symbol (Cont.)
9
Replacing the Yellow (Y), Magenta (M), Cyan (C) toner cartridge
Follow the procedure on the touch panel shown at the replacement of the colour toner cartridge.
When you want to replace a cartridge before the Replace toner cartridge symbol blinks, see the procedure
of “Replacing the Toner Cartridge” in Chapter 3 SETTING ITEMS (USER) in the User Functions Guide.
1
When the colour toner in the cartridge has run out, the following
menu appears. Press the button corresponding to the colour to be
replaced.
• The menu above appears every time after the period of time specified in the automatic function clear setting
has passed while the empty cartridge is left without being replaced.
• You can print in the black mode if necessary while the colour toner cartridge is empty.
8
Close the front cover.
• “Wait adding toner” appears. The equipment automatically starts
supplying toner.
To Next Page
Loading...
