314
10.WHEN THIS MESSAGE APPEARS
1.“Check staple cartridge” (Cont.)
10
7
Close the front cover of finisher.
If “Check staple cartridge” remains, repeat the above procedure from steps 1 to 7.
Hanging Finisher (optional: MJ-1022)
6
Install the staple cartridge onto the sta-
pler.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
1
Pull the lever and move the finisher away
carefully from the equipment.
2
Take off the staple cartridge.
To Next Page
Loading...
