317
10
6
Close the front cover of finisher.
If “Check staple cartridge” remains, repeat the above procedure from steps 1 to 6.
4
Install a new staple case into the staple
cartridge.
• Insert the new case into the cartridge until you hear a click
sound.
5
Install the staple cartridge onto the sta-
pler.
• When installing the staple cartridge, hold the mint-green colour
label portion of the bracket securely so that it will not move.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
To Next Page
Loading...
