Toshiba E-STUDIO 4525AC - Raw TCP or LPR Print in a Windows Operating System Environment Has Failed; IPP Printing in a Windows Operating System Environment Has Failed

8.QUESTIONS FOR NETWORK
52 Questions for Network
 Raw TCP or LPR print in a Windows operating system environment has failed.
Take the appropriate actions by following the checklist below. If the problem still persists, contact your service
representative.
 IPP printing in a Windows operating system environment has failed.
Take the appropriate actions by following the checklist below. If the problem still persists, contact your service
representative.
No. Check... Yes No Corrective Action
1 Are the IP address properties specified
correctly?
Next
Step
↓
→ Specify the IP address correctly.
2 Is Raw TCP print specified correctly? Next
Step
↓
→ Specify the Raw TCP print service correctly
on TopAccess.
3 Is LPR/LPD print specified correctly? Next
Step
↓
→ Specify the LPD print service correctly on
TopAccess.
4 Is the proper printer driver installed? Next
Step
↓
→ Install the proper printer driver.
5 Is the Raw TCP or the LPR port configured
with the correct IP address?
End → Specify the correct port number on
TopAccess and check that printing can be
performed by means of the equipment.
No. Check... Yes No Corrective Action
1 Are the IP address properties specified
correctly?
Next
Step
↓
→ Specify the IP address correctly.
2 Is the HTTP server on the equipment
enabled?
Next
Step
↓
→ Enable the HTTP server in the HTTP
Network Service.
3 Is IPP print specified correctly? Next
Step
↓
→ Specify the IPP print service correctly on
TopAccess.
4 Is the proper printer driver installed? Next
Step
↓
→ Install the proper printer driver.
5 Is the IPP port configured with the correct
URL?
End → Specify the correct port number on
TopAccess and check that printing can be
performed by means of the equipment.