1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 15
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a paper misfeed
1
Clear the paper misfeed.
Clear the paper misfeed following the guidance shown on the touch panel. Press or to scroll the pages.
2
After clearing the misfeed, close all the opened covers.
The equipment starts to warm up. Follow the guidance on the touch panel.
Tips on removing misfed paper
Note the following points in removing the misfed paper.
Remove the misfed paper carefully so as not to tear it.
To avoid tearing the misfed paper, remove the paper slowly with both hands. Using force may tear the paper, making it
more difficult to remove. See also that no pieces of torn paper are left inside the equipment.
When the paper misfeed sign remains after removing the misfed paper;
Depending on the timing of the occurrence, no misfed paper may be found where the paper misfeed sign indicates. If the
sign does not disappear after you have removed the misfed paper, follow the steps as instructed on the touch panel.
Do not touch the fuser unit or the metal portion around it.
Do not touch the fuser or the metal portion around it when you remove the
misfed paper from the fuser unit. This could burn you or the shock could
cause you to injure your hand in the machine.
Do not touch the transfer belt.
Do not touch the transfer belt when you remove the misfed paper inside the
right side of the equipment. Doing so may damage the equipment or result
in a poor output.
To Next Page
Loading...
Need help?
General
