1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 33
1 TROUBLESHOOTING FOR THE HARDWARE
Paper misfeed in the Hanging Finisher MJ-1031 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
4
Close the cover of the Bridge Unit.
1
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
2
Open the cover holding the handle of the Bridge Unit.
3
Remove the misfed paper inside the Bridge Unit.
5
Remove the misfed paper in the exit portion.
To Next Page
Loading...
Need help?
General
