Toshiba E-STUDIO 5518A - AMS Enlargement and Reduction Copying

e-STUDIO Job Shops
22
AMS Enlargement and Reduction Copying
(Copying > Advanced Copying)
If you specify the copy paper size in advance, the equipment will detect the original size and
automatically select the optimal reproduction ratio for the copy paper size. Perform the
following steps to enlarge or reduce an original. (AMS = Automatic Magnification Selection)
1. Place the originals you want to
copy in the automatic document
feeder.
2. On the Copy mode screen tap
Zoom.
3. Tap the LD button for the Copy
paper size.
4. Tap AMS and then OK.
5. Select other copy modes as
desired and then tap the START
button.
END