e-STUDIO Job Shops
30
4. Tap the OK button. Job build is
now set and the message “Tap
START button to copy after
changing settings” appears in the
message indication area on the
touch panel.
5. Place the first stack of originals
in the automatic document feeder
and adjust side guides.
Tip: When placing the original on
the platen glass, one page equals
one job.
Tip: You can select any paper
drawer.
Note: Tap the Settings button on
the screen to confirm the current
settings.
Note: If you want to change the settings,
press the FUNCTION CLEAR button, and
then restart from step 1.
6. Press the START button.
(continue to next step)
To Next Page
Loading...
