e-STUDIO Job Shops
56
Tandem Printing
(Continued)
4. Select Devices to use from the
drop-down menus.
Tip: Equipment selected in the
Selected Devices boxes must be
registered in Printer Folder. If you want
to use equipment not registered in
Printer Folder, add it in Add Printer on
the Others tab of the Printer driver.
5. Change the number of copies for
each piece of equipment.
Note: When you select equipment
make sure it has the features needed
to complete your print job.
6. Click the OK button to close the
dialog box.
Tip: If you select the Always Use This
Setting checkbox, you can omit the
setting of the Output Devices dialog
box for your next job.
7. Click Print on the next window to
send your file to the printer. (Image not
To Next Page
Loading...
