Toshiba E-STUDIO E-Studio 3511 - Page 304

302
14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
Tray Loading Capacity:
Unit: inch (with ±0.276” allowance)
Values in parentheses is the number of 20 lb. Bond sheets.
Single-Staple Finisher (MJ-1022)
Model Name MJ-1022
Type Hanging-type
Acceptable Paper Size LD, LG, LT, LT-R, ST-R, COMP, A3, A4, A4-R, B4, B5, A5-R, FOLIO
Acceptable Paper Weight 13.3-55 lb. Bond
Number of Copies Stapled at
a time
* Acceptable weight for
staple: 17-20 lb.Bond
LT, LT-R, A4, A4-R, B5 30 sheets
LG, B4 50 sheets
LD, COMP, A3, FOLIO 15 sheets
Stapling Position Rear
Power Source Supplied from the copier
Dimensions 17.76” (W) x 21.22” (D) x 23.23” (H)
Weight Approx. 37.5 lb.
Power Consumption 40 W max.
(MJ-1022 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 121 2
ST-R, A5-R,
B5-R
1.18”
(200)
3.89”
(700)
-- - -
LT, LT-R, A4,
A4-R, B5
1.18”
(200)
3.89”
(700)
2.89”
(500)
3.89”
(700)
170 sheets or 30 sets
*1
*1.The value reached earlier by using condition
600 sheets or 50 sets
*1
LG, B4 0.78”
(140)
2.75”
(490)
0.78”
(140)
2.75”
(490)
110 sheets or 30 sets
*1
400 sheets or 50 sets
*1
LD, COMP, A3,
FOLIO
0.59”
(100)
1.92”
(350)
0.59”
(100)
1.92”
(350)
80 sheets or 30 sets
*1
300 sheets or 50 sets
*1