Toshiba E-STUDIO E-Studio 3511 - Copying Function Combination Matrix

303
14
Unit: inch (with ±0.276” allowance)
Values in parentheses is the number of 20 lb. Bond sheets.
* The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject
to change without notice in the interest of product improvement.
(MJ-1022 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
Combination of
different width
paper
15
(100)
49
(350)
-- - -
LD and LT 0.59”
(100)
1.92”
(350)
0.59”
(100)
1.92”
(350)
(80 sheets or 15 sets)
*1
*1.The value reached earlier by using condition
(300 sheets or 15 sets)
*1
LG and LT-R 0.59”
(100)
1.92”
(350)
0.59”
(100)
1.92”
(350)
(110 sheets or 15
sets)
*1
(400 sheets or 15 sets)
*1
A3 and A4 0.59”
(100)
1.92”
(350)
0.59”
(100)
1.92”
(350)
(80 sheets or 15 sets)
*1
(300 sheets or 15 sets)
*1
B4 and B5 0.59”
(100)
1.92”
(350)
0.59”
(100)
1.92”
(350)
(110 sheets or 15
sets)
*1
(400 sheets or 15 sets)
*1
Bridge Unit
Model Name KN-3511
Dimensions 18.4” (W) x 17.9” (D) x 6.9” (H) (incl. Cover)
Weight Approx. 8.4 lb.
Hole Punch Unit
Model Name MJ-6004
Acceptable Paper Size LD, LG, LT, LT-R, COMP, A3, A4, A4-R, B4, B5, A5-R, FOLIO
Acceptable Paper Weight 17-16 lb. Bond (OHP film and specially treated paper are not available)
Dimensions 4.4” (W) x 24.3” (D) x 14.9” (H)
Weight Approx. 19.8 lb.
Number of punch holes and hole
diameter
Available paper sizes
North America
MJ-6004N
2/3 holes switchable
(8.0 mm dia. or 0.31”dia.)
2 holes: LG, LT-R, A4-R
3 holes: LD, LT, A3, A4