93
3
5
Select LT copy size.
6
If you need a binding space, select the
book margin mode from the Image Shift
function ("Creating a Bookbinding
Margin" Page 109).
z Select other copy modes as required.
7
Place the first page(s) on the glass, and
then press the [START] button.
- If you do not copy your originals from the first page, the copies will
not be arranged in the same order as the original.
- Center the book on the yellow indicator line with its bottom toward
you. "Book-type Originals" Page 49
8
Turn to the next page, set the book again
and press the [START] button.
- Pressing the [YES] button and then the [START] button also
continues copying.
- Repeat the procedure above until all the originals have been
scanned.
9
After all the originals are scanned, press
the [FINISHED] button.
- Press the [COPY FINAL PAGE] button if the last original has only
one page.
To Next Page
Loading...
