Toshiba e-studio2007 - Page 134

5 VARIOUS FUNCTIONS
132 User Functions Menu List
 GENERAL
Menu Functions Settings Description
CHANGE LANGUAGE S-CHINESE (SIMPLIFIED
CHINESE), T-CHINESE
(TRADITIONAL CHINESE),
JAPANESE, ENGLISH, FRENCH,
ITALIAN, GERMAN, POLISH,
RUSSIAN, SPANISH, SWEDISH,
NORWEGIAN, FINNISH, DANISH,
DUTCH, PORTUGUESE, CZECH,
HUNGARIAN, ROMANIAN,
SLOVAKIAN, LITHUANIAN, IRISH,
SLOVENIAN, BULGARIAN,
LATVIAN, SERBIAN, TURKISH
Sets the default language. The default
language and the appearance order
vary depending on the region.
CLOCK DATE/TIME YYYY/MM/DD HH:MM
Year:2012 - 2037
Month:01 - 12
Day:01 - 28, 29, 30, 31
Hour:00 - 23
Minute:00 - 59
Sets the date and time.
DATE FORMAT MM/DD/YY
DD/MM/YY
YY/MM/DD
Sets the data format.
WALKUP SCREEN COPY, SCAN, FAX Sets the start screen.
TIMERS AUTO POWER SAVE 1, 3, 4, 5, 7, 10, 15, 20, 30, 45, 60 Sets the period of time (in minutes) that
this equipment should wait before low
power mode is activated.
SLEEP MODE 1, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60 Sets the period of time (in minutes) that
this equipment should wait before sleep
mode is activated.
AUTO CLEAR 15, 30, 45, 60, 75, 90, 105, 120, 135,
150
Sets the time (in seconds) to clear the
previous settings and return to the main
screen.
POP UP DRAWER SET ENABLE, DISABLE Sets whether to display a pop-up
message on the LCD screen in the
following cases.
 When the size of paper loaded in
the drawer differs from setting.
 When a paper misfeed occurs.
PAPER JAM RECOVERY ENABLE, DISABLE
LCD CONTRAST -3 (Light) to +3 (Dark) Sets the brightness of LCD panel.
NETWORK COMPLETE - Completes the network settings.
ETHERNET AUTO, 10MBPS HALF DUPLEX,
10MBPS FULL DUPLEX, 100MBPS
HALF DUPLEX, 100MBPS FULL
DUPLEX
Select the desired combination of
communication speed and
transmission method.
TCP/IP ADDRESS
MODE
STATIC IP, DYNAMIC, NO AUTO IP Sets a method for specifying an IP
address.
IP ADDRESS 000. 000. 000. 000 - 255.255.255.255 Sets the IP address of this equipment.
SUBNET MASK 000. 000. 000. 000 - 255.255.255.255 Sets the subnet mask of this
equipment.
DEFAULT
GATEWAY
000. 000. 000. 000 - 255.255.255.255 Sets the default gateway of this
equipment.
HTTP HTTP SERVER ENABLE, DISABLE Sets whether to use the HTTP network
server service.
PRIMARY PORT
NUMBER
1 - 65535 Sets the primary port number to be
used for receiving HTTP access from
other clients. Normally use the default
port number “80”.