2.COPY FUNCTIONS
Copy Settings 53
2 COPY FUNCTIONS
Erasing the shadow on edges
You can erase the shadow on the edges of copies. When you copy thick books, you can erase the surrounding shadow
with this function. The area to erase can be changed from 4 to 15 mm (0.2 to 0.6") in increments of 1 mm (0.04").
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item.
4
Set the setting as follows.
For “OFF”
Press [OK].
For “ON”
1) Press .
2) Press or to increase or decrease the value for the area to erase.
3) Press [OK].
If you just press [OK] for “ON”, the default value (7 mm (0.3")) of this function is used.
Menu Functions Settings
EDGE ERASE OFF
ON
A4
1
READY
100%
ID CARD:OFF
EDGE ERASE:OFF
To Next Page
Loading...
Need help?
General
