2.COPY FUNCTIONS
Copy Settings 43
2 COPY FUNCTIONS
Selecting the paper
You can select the paper source in which the paper of the desired size and type is loaded.
P.20 “Acceptable paper types”
Selecting the paper source
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item.
To select the paper size:
1) Press .
2) Press or to select the paper size, and then press [OK].
To accept the setting:
Press [OK].
Menu Functions Settings Description
DRAWER Drawer 1 XX, Drawer 2 XX,
Drawer 3 XX, Drawer 4 XX
Uses the drawer as the paper source. The variable “XX” indicates
the paper size.
Bypass XX Uses the bypass tray as the paper source. Available only when
the paper is loaded on the bypass tray. The variable “XX”
indicates the paper size.
APS
Automatic Paper Selection. Detects the size of the original and
selects paper of the same size automatically.
This function may not work properly for totally dark originals or originals with dark borders.
For the detectable original sizes, see the following page:
P.34 “Acceptable originals”
A4
1
READY
100%
TEXT/PHOTO
A4
1
To Next Page
Loading...
Need help?
General
