2 COPY FUNCTIONS
54 Copy Settings
Copying right and left pages separately
When you place a booklet-type original on the original glass while it is being opened, the right and left pages of
the opened section can be copied separately on different paper. Also, when the Automatic Duplexing Unit is installed, they
can be copied on both sides of paper. You do not need to move the original on the original glass. The book margin width
can be set between 8 to 30 mm (0.3 to 1.2") in increments of 1 mm (0.04").
A4, B5, LT, and 16K sizes are available for this function.
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item.
4
Set the setting as follows.
For “OFF”
Press [OK].
For “ON”
1) Press .
2) Press
or to increase or decrease the value for the book margin width.
3) Press [OK].
If you just press [OK] for “ON”, the default value (15 mm (0.6")) of this function is used.
Menu Functions Settings
DUAL PAGE OFF
ON
2
23
3
To Next Page
Loading...
Need help?
General
