e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 18
[C] Display PC board (DSP board)/Key control PC board (KEY board)/LCD
(1) Take off the control panel unit
( P.5-17 "[B] Control panel unit").
(2) Remove 3 screws and take off the cover.
Fig. 5-12
(3) Remove 5 screws and take off the hinge
bracket.
Fig. 5-13
(4) Disconnect 5 connectors.
(5) Release the harness from 2 harness clamps.
(6) Remove 1 screw and take off the DSP board.
Fig. 5-14
Cover
Hinge bracket
DSP board
07/11
To Next Page
Loading...
