6
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
SCANNER
6 - 17
6.7 Disassembly and Replacement
[A] Original glass
(1) Take off the right upper cover-1
( P.2-33 "[F] Right upper cover-1").
(2) Remove 2 screws and take off the fixing
bracket.
Fig. 6-19
(3) Take off the original glass.
Note:
When installing, fit 2 small protrusions of the
original glass in the groove of the equipment
and fix the original glass with the fixing
bracket by pushing it to the left rear direction.
Fig. 6-20
Fixing bracket
Original glass
To Next Page
Loading...
