Toshiba e-STUDIO200L/230/280 SERIES - 11 Drum Related Section; Configuration

11
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
DRUM RELATED SECTION
11 - 1
11. DRUM RELATED SECTION
11.1 Configuration
This chapter explains about the area around the drum, drum itself, image processing, their parts and
control circuits.
This area mainly consists of the following components:
• Drum cleaner unit
-Drum
- Main charger
- Cleaner
Cleaning blade
Toner recovery blade
Toner recovery auger
- Discharge LED
• Transfer / Separation charger
- Transfer guide
- Transfer charger
- Separation charger
• Exhaust fan
• Drum thermistor ( P.12-1 "12. DEVELOPMENT SYSTEM")
• High-voltage transformer
• Temperature/humidity sensor
• Internal cooling fan
Fig. 11-1
Drum thermistor
Separation charger
Exhaust fan
Recovery blade
Transfer charger
Main charger
Discharge LED
Cleaning blade
Toner cartridge
installation switch
Pre-Transfer guide
Transfer guide roller
Ozone filter
Drum
Toner recovery auger
Post-Transfer guide