Toshiba e-STUDIO200L - Page 273

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 237
2
Cleaning roller 1266-0 to 8 1267 <Default values of code 1266
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0
Sub-code 1: 128,000/148,000/180,000
Sub-code 4: 240,000/240,000/240,000
Fuser roller separation
finger
1268-0 to 8 1269 <Default values of code 1268
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0
Sub-code 1: 128,000/148,000/180,000
Sub-code 4: 240,000/240,000/240,000
Pickup roller (RADF) 1282-0,1,2,8 1283 <Default values of code 1282
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 120,000/120,000/120,000
Feed roller (RADF) 1284-0,1,2,8 1285 <Default values of code 1284
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 120,000/120,000/120,000
Separation roller
(RADF)
1286-0,1,2,8 1287 <Default values of code 1286
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 120,000/120,000/120,000
Pickup roller
(Upper drawer)
1290-0,1,2,8 1291 <Default values of code 1290
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(Lower drawer)
1292-0,1,2,8 1293 <Default values of code 1292
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller (LCF) 1294-0,1,2,8 1295 <Default values of code 1294
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 160,000/160,000/160,000
Feed roller
(Upper drawer)
1298-0,1,2,8 1299 <Default values of code 1298
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Feed roller
(Lower drawer)
1300-0,1,2,8 1301 <Default values of code 1300
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Feed roller (LCF) 1302-0,1,2,8 1303 <Default values of code 1302
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 160,000/160,000/160,000
Separation roller
(Upper drawer)
1306-0,1,2,8 1307 <Default values of code 1306
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Separation roller
(Lower drawer)
1308-0,1,2,8 1309 <Default values of code 1308
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
05/11